VigorAP 903

Special Price £139.00 Regular Price £149.00
Managed 11ac Wave 2 Business-class Mesh Wireless Access Point
Mesh Wireless

DrayTek's Mesh system connects and intelligently manages a group of VigorAPs over wireless. The Self-Optimising Mesh ensures your wireless network nodes are always using the fastest path to the Mesh Root.

Benefits: Quick to set up and easy to manage. Reduces the need for cable installation.


Mesh Nodes identify the best next hop and connect with it automatically. In case of a Mesh Node failure, the surrounding nodes automatically re-connect and resume service without downtime.

Benefits: Eliminates Wireless dead zones. Zero downtime.

5 Gigabit LAN Ports

Transfer from Wireless to Wired Ethernet devices without bottlenecks, using the 5 Gigabit LAN ports. Connect extra network devices into your network or Mesh, without the need for an additional switch.

Benefits: Connect up to 5 Wired Ethernet devices at high speed

Easy to Configure and Manage

The DrayTek Wireless app simplifies setting up your network. Optionally configure and monitor through one of DrayTek's management platforms - VigorACS cloud, VigorConnect, Router AP Management, or directly via the AP's Web Interface.

Benefits: Quick to install and change configuration.

Power Over Ethernet

The VigorAP 903 can be powered through its Ethernet cable with standard IEEE 802.3af PoE, for a tidier and more convenient installation.

Benefits: Easily install the VigorAP in locations without mains power.

Wireless Optimisation

802.11ac Wave 2: Multi-User MIMO improves efficiency.

Band Steering: Allows 5GHz devices to achieve optimum speeds.

Airtime Fairness: Improves time management for wireless clients.

AP Assisted Roaming: Helps clients connect to the best AP.

VigorAP 903

Mesh Wireless 802.11ac Range Extender & Access Point

VigorAP 903 is a high-performance Mesh Wireless solution, designed to expand the wireless coverage, eliminate Wi-Fi dead zones and significantly reduce the cost of network deployments. It can also be used as a traditional access point either managed or stand alone so has the flexibility to be used how you need it.

The VigorAP 903 is a dual-band 802.11ac Wave 2 Mesh Wireless solution, designed to eliminate wireless drop outs, stuttering videos, slow download speeds, poor signal and Wi-Fi dead zones. One access point acts as the controller (Mesh root) and in total up to 8 access points create an easy to manage wireless mesh. Extend coverage without running expensive cabling.

Initial setup of the VigorAP 903 is easy with the DrayTek Wireless app, whether it's creating a new Mesh network or being set up in AP and Range Extender modes, the Quick Start Wizard assists throughout.
Manage the VigorAP 903 centrally through the VigorACS central management platform, VigorConnect, Router AP Management, or simply on its own as a stand-alone access point. The VigorAP 903 has the flexibility to be used how you need it.

More Information
mpn VAP903-K


VigorAP 903

Product Code EAN Description
VAP903-K 4712909127158 VigorAP 903 Mesh Wireless 802.11ac Access Point

Key Specifications

  • Mesh Wireless Access Point and Range Extender
  • AC1300 - 11ac 'Wave 2' Dual Band Wireless
  • Power through 802.3af PoE or supplied DC power adapter
  • 5 Gigabit LAN ports
  • Multi-SSID over Mesh – New! Separate internal and Guest networks over Mesh (requires firmware 1.3.4, available now)
  • Centrally Managed or Standalone operation
  • Advanced Access Control with Mobile Device Management and Station Control

Technical Specification (UK Hardware Spec.)

  • Operating Modes

    • Mesh Root
    • Mesh Node
    • Range Extender
    • Access Point
  • Physical Interfaces/Controls

    • 5 x Gigabit Ethernet LAN Ports
    • USB 2.0 Port
    • WLAN On/Off & WPS Button
    • Factory Reset Button
    • 2 x Dual-Band Omni-directional RP-SMA Antennae
  • Wireless Performance

    • AC1300 Class Wireless Access Point
    • 5GHz: PHY Rate 866Mb/s
    • 2.4GHz: PHY Rate 400Mb/s
  • Wireless LAN Compatibility

    • IEEE 802.11ac (Wave 1 & 2) / a / b / g / n
    • Frequency Band 2.4 GHz & 5.8Ghz - Simultaneous Operation
    • Up to 64 clients per radio
    • Mesh uses 5GHz 802.11ac radio for operation
  • 2.4GHz Wireless LAN Features

    • 802.11b, 802.11g, 802.11n
    • 20 / 40 MHz
    • Up to 400Mb/s total Wi-Fi throughput (PHY Rate):
      • 802.11b/g/n: 300Mb/s PHY rate (150Mb/s per Spatial Stream)
      • 256-QAM: 400Mb/s PHY rate (200Mb/s per Spatial Stream)
  • 5Ghz Wireless LAN Features

    • 802.11ac (Wave 1 & 2) / 802.11n / 802.11a
    • 20 / 40 / 80 MHz
    • Extended 5Ghz Band - Channels 36-48, 52-64, 100-140
    • DFS/TPC Support
    • Multi-User MIMO - New!
    • Up to 866Mb/s total Wi-Fi throughput (PHY Rate):
      • 802.11a/n: 300Mb/s PHY rate (150Mb/s per Spatial Stream)
      • 802.11ac: 866Mb/s PHY rate (433Mb/s per Spatial Stream)
  • Security Features

    • Wireless Encryption : WPA2 (802.11i) Encryption
      • also supports WPA/WEP (Not recommended)
    • Built in 802.1x server (PEAP / EAP-TLS)
    • 802.1x RADIUS Proxy (PEAP / EAP-TLS)
    • PMK Caching & Pre-authentication
    • Wireless Client Isolation
    • Control Isolation of 2.4GHz and 5GHz bands
    • Hidden SSIDs (Selectable)
    • WPS - WiFi Protected Setup
    • MAC Address Filtering (ACL) - Up to 256 entries
    • Mobile Device Management
    • EAPOL Key Retry - New! - Disable EAPOL Key Retry to protect unpatched WLAN clients from KRACK
  • Wireless Control Features

    • Wireless Client Status List in WUI
    • Client Limit per radio
    • Client Limit per SSID - New!
    • Up to four distinct SSIDs (for VLANs) for each frequency band (2.4/5Ghz)
    • MAC Cloning
    • Built-in DHCP Server & DHCP Relay
    • Trusted DHCP Server IP for WLAN - New! - Only specifed DHCP server IP can assign IP addresses to WLAN clients
    • 802.1q VLAN
    • Station Control - Time limit wireless connectivity per Station (e.g. 1 hour) & set allowed Reconnection time (e.g. 1 day)
  • Wireless Performance Optimisation

    • Airtime Fairness
    • Band Steering
    • AP-Assisted Client Mobility
    • WMM (Wireless MultiMedia)
    • Bandwidth Management (Per Station / Per SSID)
  • Diagnostic Features

    • System Log
    • Speed Test
    • Traffic Graph - AP Traffic & Per Station
    • Data Flow Monitor - View live traffic usage per WLAN client
    • Wireless LAN Statistics
    • Interference Monitor - Built-in Site Surveyor
  • Management

    • Web Interface (HTTP/HTTPS)
    • DHCP Client
    • TR-069 Control (For VigorACS or other TR-069 platform)
    • CLI (Command Line Interface) - Telnet
    • Firmware upgrade by TR-069/HTTP
    • Central AP Management (from compatible DrayTek router/controller)
    • SNMP v2, v2c, v3
    • Management VLAN
    • LED Control (enable/disable/schedule)
    • Configuration File Export (with password) & Import
    • Wireless Auto On/Off - New! - Sound alert / Disable Wireless if VigorAP is unable to ping specified host
  • Power Requirements

    • Maximum Power Consumption: 12 Watt
    • DC 12V via external 100-240v AC/DC PSU (supplied)
    • 802.3af PoE via LAN port A1. Requires PoE injector or a PoE switch such as the VigorSwitch P2121
  • Environmental & Physical

    • Operating Temperature : 0 ° C to 45 ° C
    • Operating Humidity: 10% to 90% (Non-condensing)
    • Physical Dimensions: 107mm (W) x 167mm (H) x 45mm (D)
    • Physical Dimensions with Aerials: 107mm (W) x 305mm (H) x 45mm (D)
    • Weight : 370g
    • Fitting: Wall Mountable or Free Standing
  • Pack Contents

    • VigorAP 903 access point
    • Two RP-SMA Omnidirectional aerials
    • Quick Start Guide
    • DC 12V PSU
  • ROHS & CE Compliant

  • Warranty: Two (2) Year Manufacturer's RTB

©2022 CMS Distribution. All Rights Reserved.